EasyManuals Logo
Home>ICM Controls>Thermostat>SC 3006

ICM Controls SC 3006 User Manual

ICM Controls SC 3006
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
1
Electrical Rating: 24 VAC (18 to 30 VAC) 1 amp maximum per terminal
3 amp maximum total load
Temperature control ranges: 45°F to 90°F Accuracy: ± 1°F
System configurations: 1-stage heat, 1-stage cool, heat pump, gas, oil, electric
Timing: Anti-short Cycle: 5 minutes
Backlight Operation: 10 seconds
Terminations: C, RH, RC, W, Y, B, O, G, S1, S2
Specications
WARNING!
: Always turn off power at the main power supply before installing, cleaning, or removing
thermostat.
This thermostat is for 24 VAC applications only; do not use on voltages over 30 VAC
Do not short across terminals of gas valve or system control to test operation; this will damage your
thermostat and void your warranty
All wiring must conform to local and national electrical and building codes
Do not use air conditioning when the outdoor temperature is below 50 degrees; this can damage your
A/C system and cause personal injuries
Use this thermostat only as described in this manual
Important Safety Information
Package includes: SimpleComfort
®
3006 programmable thermostat on base, labeled thermostat cover,
wiring labels, screws and wall anchors, Installation, Operation and Application Guide.
Tools required for installation: drill, hammer, screwdriver.
Package Contents/Tools Required

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ICM Controls SC 3006 and is the answer not in the manual?

ICM Controls SC 3006 Specifications

General IconGeneral
BrandICM Controls
ModelSC 3006
CategoryThermostat
LanguageEnglish

Related product manuals