17
Simpleset® Programming
Simpleset
®
programming is a convenient method of programming the thermostat. Once the entire Monday
(Day 1) schedule is set, Simpleset
®
programming will copy the Monday schedule to every day of the week.
After the complete Monday schedule is set (see Programming on Page 14), you are at the Day 2 screen:
1. Press the button once. Day 1 screen displays.
2. Press and hold the button for 3 seconds.
• The days of the week will count down from 7 to 1 and this will lock the
settings into memory.
• Once the schedule is locked in, you can go through each day and make
any changes you require. This feature speeds up the programming of
the standard weekday/weekend schedule.
3. Press and hold the button for 5 seconds to exit program mode and return to the OFF mode.
The SC3006 thermostat has a button lockout feature so the settings cannot be changed or tampered
with. With the lockout activated, any button press will result in “LOC” being displayed.
To activate the LOC function:
1. Press the button and hold it in.
2. Also press the button and keep both depressed for 10 seconds.
3. LOC will display and all buttons will be disabled.
To deactivate the LOC feature, repeat steps 1 & 2 above.
Lockout Function
To Next Page
Loading...
Need help?
General
