64
12
OPTIONS
IC-PW1 HF + 50 MHz 1 kW LINEAR AMPLIFIER
Full-duty 1 kW linear amplifier
including an automatic antenna
tuner. Has automatic tuning and
band selection capability. Full
break-in (QSK) operation is pos-
sible. The amplifier/power supply
unit and the remote control unit
are separated. The OPC-599 is
necessary to connect the IC-
706MKIIG to the IC-PW1.
AT-180 HF/50 MHz AUTOMATIC
ANTENNA TUNER
Fully automatic antenna tuner with preset
memories for each 100 kHz. Unique “auto-
matic tuner on” function is available. See
p. 62 for AT-180 specifications.
HM-118T HAND MICROPHONE
Includes DTMF keypad, hand microphone.
SM-20 DESKTOP MICROPHONE
Includes [UP]/[DOWN] switches and a low
cut function. The OPC-589 is necessary to
use this microphone.
MB-65 MOUNTING BASE
Allows you to conveniently vehicle-mount
the front panel of the IC-706MKIIG. An
MB-63 must be used in combination with
the MB-65.
AH-2b ANTENNA ELEMENT
A 2.5 m long antenna
element for mobile
operation with the
AH-3.
• Frequency
coverage
3.5–28 MHz band
with the AH-3
SM-8 DESKTOP MICROPHONE
Including 2 connection cables for simulta-
neous connection of 2 transceivers. Has
[UP]/[DOWN] switches. The OPC-589 is
necessary to use this microphone.
MB-63 MOUNTING BRACKET
Metal plate for attaching the front panel to
a wall or other such flat surface.
AH-4 HF AUTOMATIC ANTENNA
TUNER
Specially designed to tune a long wire
antenna for portable or mobile HF/50 MHz
operation. The “PTT tune” function pro-
vides simple operation.
• Input power rating: 150 W
PS-85 DC POWER SUPPLY
Light weight switching regulator system
power supply.
• Output voltage: 13.8 V DC
• Max. current drain: 20 A
MB-62 MOBILE MOUNTING
BRACKET
Mounts the transceiver main body, with or
without the front panel, inside a vehicle.
To Next Page
Loading...
