Icom IC-208H - 11 Other Functions; I Set Mode

56
11
OTHER FUNCTIONS
10
11
■ Set mode
• Set mode operation
q Push [SET•LOCK] to enter the set mode.
w Push
[SET•LOCK] or [S.MW•MW] to select the desired
item.
e Rotate [DIAL] to select the condition or value.
r Push
[MONI•DTMF] to exit set mode.
• Set mode items
z Push [ SET B(D-OFF)] to enter set mode.
x Push [
SET B(D-OFF)] or [ ENT C(T-OFF)] to select
the desired item.
c Push [Y] or [Z] to select the condition or value.
v Push [
CLR A(MW)] to exit set mode.
SET
B
*Available for USA version only.
†
Appears when accessing set mode from VFO mode only.
‡
Appears when accessing set mode from memory mode only.
: Push (front panel); or (microphone)
: Push (front panel); or (microphone)
• Weather alert*
• Display dimmer
• Display color
• Repeater tone
frequency
• Tone squelch
frequency
• DTCS code
• DTCS polarity
• Offset frequency
• Tuning step
• Scan resume timer
• Channel skip setting
‡
• Bank link function
‡
• Mic lock function
• Program skip
†
• Bank setting
‡
• Memory name
‡