78
13
SPECIFICATIONS AND OPTIONS
13
■ Options
HM-133
REMOTE
-
CONTROL MICROPHONE
Wired remote control microphone with key backlight. Same as that
supplied with the transceiver.
HM-118TAN/TN
DTMF MICROPHONE
HM-118N
HAND MICROPHONE
HS-62
FLEXIBLE MOBILE MICROPHONE
+ HS-15SB
SWITCH BOX
+ OPC-589
ADAPTOR CABLE
For all-round mobile operation.
OPC-600/600R*, OPC-601/601R*
SEPARATION CABLES
OPC-600/600R: Same as that supplied with the transceiver. 3.5 m
(11.5 ft)
OPC-601/601R: For extended separate installation. 7.0 m (23.0 ft)
* A ferrite core is supplied with the OPC-600R or OPC-601R for the
USA version.
MB-58
REMOTE CONTROLLER BRACKET
Mounts the remote controller in a convenient location for operation
with the front panel detached from the main body.
MB-65
MOUNTING BASE
Mounts the remote controller on to variety of place in vehicle. MB-84
is required for mounting.
MB-17A
MOBILE MOUNTING BRACKET
One-touch bracket. Transceiver main unit easily attached or re-
moved.
OPC-440/OPC-647
MIC EXTENSION CABLES
OPC-440: 5.0 m (16.4 ft); OPC-647: 2.5 m (8.2 ft)
OPC-441
SPEAKER EXTENSION CABLE
5.0 m (16.4 ft)
SP-7/SP-10
EXTERNAL SPEAKERS
SP-7: For base station use. Cable length: 1.0 m; 3.3 ft
SP-10: For all-round mobile operation. Cable length: 1.5 m; 4.9 ft
OPC-347/OPC-1132
DC POWER CABLES
OPC-347: 7.0 m (23 ft)
OPC-1132: 3.0 m (9.8 ft) Same as that supplied with the transceiver.
CS-208
CLONING SOFTWARE
+ OPC-478U
CLONING CABLE
Provides quick and easy programming items, such as memory chan-
nels, set mode contents for local repeater frequencies, via PC’s USB
terminal. RS-232C type cloning cable, OPC-478, also available.
OPC-474
CLONING CABLE
Used for data cloning between transceivers.
To Next Page
Loading...
