Icom IC-208H - Page 95

80
14
MODE ARRANGEMENT
14
Auto repeater (p. 62)
(USA version only)
Auto power off (p. 62) Cooling fan (p. 63) Data speed (p. 63)
Squelch delay (p. 63)Microphone sensitivity (p. 63)Squelch attenuator (p. 63)Active band (p. 64)
Repeater tone frequency
(p. 57)
Tone squelch frequency
(p. 57)
DTCS code (p. 58)
DTCS polarity (p. 58)
Offset frequency (p. 58)
Tuning step (p. 59)
Scan resume timer (p. 58)
Channel skip setting
‡
(p. 59)
Memory name
‡
(p. 59)
Mic lock function (p. 57)
Bank setting
‡
(p. 59)
*Available in the USA version only.
: Push (front panel); or (microphone)
: Push (front panel); or (microphone)
*Available for USA version only.
†
Appears when accessing set mode from VFO mode only.
‡
Appears when accessing set mode from memory mode only.
: Push (front panel); or (microphone)
: Push (front panel); or (microphone)