5
TONE SQUELCH AND POCKET BEEP
12
Pocket Beep
e Push [PTT] to answer and to stop the beep and
blinking.
• The transceiver automatically selects Tone Squelch.
This function uses the CTCSS (subaudible) tone and
the DTCS code for calling. You can also use it as a
“common pager” to inform you that someone called
while you were away from the transceiver.
D Waiting for a call from a station
q Rotate [ROTARY SELECTOR] to select the desired
channel (excluding channel 5 or 35).
w Hold down [Side 1] for 2 seconds several times until
“TSQL ë” is displayed.
• Holding down [Side 1] for 2 seconds switches between
“TSQL” (Tone Squelch), “TSQL ë” (Pocket Beep) and
OFF (cancel).
• When you receive a signal with a matching tone or
code, a beep sounds every 10 seconds and “ë” blinks.
Blinks
To Next Page
Loading...
Need help?
General
