Icom IC-7100 - Page 13

1
PANEL DESCRIPTION
1-9
!9 FUNCTION ICONS
“VOX” appears when the VOX function is activat- ➥
ed. (FM sec. 6)
The Break-in icons appear when the Break-in ➥
function is turned ON. (FM sec. 6)
  •“F-BKIN” appearswhentheFullBreak-in functionis
turned ON.
  •“BK-IN”appearswhentheSemiBreak-infunctionis
turned ON.
The Preamp icons appear when a preamplifier is ➥
turned ON. (FM sec. 5)
  •In the HF, 50/70 MHz frequency band, either
“P.AMP1” or “P.AMP2” is displayed when preamp 1
or preamp 2 is ON.
  •Inthe144/430MHzfrequencyband,“P.AMP”isdis-
played when the preamp is ON.
“ATT” appears when the Attenuator function is ➥
turned ON. (FM sec. 5)
The AGC icons display the selected AGC time ➥
constant. (FM sec. 5)
  •“AGC-F”forAGCfast;“AGC-M”forAGCmid;“AGC-S”
for AGC slow; “AGC-OFF” for AGC OFF.
  •IntheFM,WFMandDVmode,“AGC-F”forAGCfast
is fixed.
“DUP+” appears when plus duplex, “DUP –” ap- ➥
pears when minus duplex (repeater) operation is
selected. (FM sec. 4)
➥“RIT” and the shift frequency are displayed when
the RIT function is turned ON. (FM sec. 5)
“ ➥ ” appears when the Speech Compressor
function is turned ON.
“ ➥ ” appears when the Noise Blanker function is
turned ON. (FM sec. 5)
“ ➥ ” appears when the Noise Reduction function
is turned ON. (FM sec. 5)
The Notch icons appear when the Notch filter ➥
function is turned ON. (FM sec. 5)
(Mode: SSB/CW/RTTY/AM)
 •“ ” appears when the Manual Notch function is
turned ON.
(Mode: SSB/AM/FM)
 •“ ” appears when the Automatic Notch function is
turned ON.
“ ➥ ” appears when priority scan is turned ON.
(FM sec. 12)
“ ➥ ” appears when the VSC (Voice Squelch
Control) function is turned ON.
(Mode: DV)
“ ➥
” appears when the EMR (Enhanced Moni-
tor Receive) communication mode is selected.
(FM sec. 9)
  •IntheEMRcommunicationmode,nocallsignsetting
is necessary when operating in the DV mode.
“ ➥ ” blinks when receiving an EMR signal.
➥ “ ” appears when the BK (Break-in) function is
turned ON. (FM sec. 9)
• The BK function allows you to break into a conversa-
tion where the two other stations are communicating
with call sign squelch enabled.
“ ➥ ”blinks when receiving a break-in call.