Icom IC-746PRO - Page 97

2001 NEW
84
11
SET MODE
17. One Touch Rptr
This item turns the one touch repeater function ON
(DUP- or DUP+) and OFF.
When [F2 DUP] is pushed for 1 sec. in M1, the se-
lected offset direction and the programmed duplex
offset frequency (depending on the operating fre-
quency band) is set with the displayed frequency.
17 DUP-
One Touch Rptr
18. Auto Repeater
This item turns the auto repeater function to ON-1
(auto duplex setting), ON-2 (auto duplex setting and
activating tone encoder) or OFF.
See p. 46 for details concerning the auto repeater
function.
18 ON-1
Auto Repeater
19. Auto Tune
The internal antenna tuner has an automatic start ca-
pability which starts tuning if the SWR is higher than
1.5–3:1 in the HF bands.
When “OFF” is selected, the tuner remains OFF even
when the SWR is poor (1.5–3:1). When “ON” is se-
lected, automatic tune starts even when the tuner is
turned OFF.
19 OFF
Auto Tune
20. PTT Tune
Tuning of the internal or external antenna tuner can
be started automatically at the moment the PTT is
pushed after the operating frequency is changed
(more than 1% from the last-tuned frequency).
2O OFF
PTT Tune
21. 96OObps Mode
This item turn the 9600 bps data transmission capa-
bility ON and OFF.
ON : For 9600 bps data transmission.
OFF : For the regular audio (or slower data)
transmission only.
21 OFF
96OObps Mode
■ General set mode (continued)
IC-746PRO.qxd 02.4.2 11:31 Page 84