Icom IC-F29SR - Setting the microphone gain

4
SETTINGS
10
Setting the microphone gain
Higher levels make the microphone more sensitive to
the user’s voice.
Rotate q [VOL] to turn OFF the power.
Set w [ROTARY SELECTOR] to Channel 16.
While holding down e [Upper], rotate [VOL] to turn
ON the power and enter the microphone gain adjust-
ment mode.
Push r [Upper] or to increase, or push [Lower] to de-
crease the microphone gain.
 •Theadjustablerangeis1(minimum)to4(maximum).
 •Abeepsoundsafterpushing[Upper] or [Lower].
An error beep sounds if you try to exceed the adjustable
range.
NOTE: The Beep function should be turned ON. (p. 5)
Rotate t [VOL] to turn OFF the power to exit the mi-
crophone gain adjustment mode.
[ROTARY SELECTOR]
[VOL]
[Lower]
[Upper]