42
5
MENU SCREEN
2001 NEW
■ Manager Menu (Continued)
D Built-in Test
You can check the transceiver’s condition by using
the “Built-in Test” item.
q Push [MNGR](#) to enter the Manager Menu
screen.
• “Admin Logout” is automatically selected.
w Push [r] or [s] to select “Built-in Test,” and then
push [4].
e Push [r] or [s] to select the item, and then push
[4] to start testing.
• “Auto,” “Logic,” “Receiver” and “Transmitter” are select-
able.
• If any problems are found, “Test failed” appears.
• If no problems are found, “Test passed” appears.
D Information
You can display a variety of information by using the
“Information” item.
q Push [MNGR](#) to enter the Manager Menu
screen.
• “Admin Logout” is automatically selected.
w Push [r] or [s] to select “Information,” and then
push [4].
e Push [r] or [s] to select the item, and then push
[4] to display the information.
• “Date/Time,” “GPS,” “Priority Network,” “Unit” and “Ver-
sion” are selectable.
• “GPS” requires data from an external GPS unit.
2001 NEW
To Next Page
Loading...
Need help?
General
