15
6
DSC OPERATION
New2001
6
■ DSC individual ID
A total of 30 DSC address IDs (9-digit) can be programmed
and named with up to 5 characters.
D Programming Address ID/Group ID
q Push [DSC•POS] to enter the DSC menu.
w Push [Y] or [Z] to select “ ,” and push
[DSC•
POS].
e Push [Y] or [Z] to select “ ,” and push [DSC•
POS
].
r Push [Y] or [Z] to input 9-digit of the appropriate Individ-
ual/Group ID.
• Push [16•9] or [CH/WX•DUAL] to move the cursor forward or
backward, respectively.
• Push [SCAN•TAG] to cancel and exit the condition.
1st digit ‘0’ is fixed for a group ID. Thus an address ID input
cannot start with ‘0.’ When you input 1st digit ‘0’ and other 8
digits, the ID is automatically registered as a group ID.
t After inputting 9-digit ID, push [DSC•POS] to input 5 char-
acters ID name using [Y] or [Z].
• Push [16•9] or [CH/WX•DUAL] to move the cursor forward or
backward, respectively.
• Push [SCAN•TAG
] to cancel and exit the condition.
y Push [DSC•POS] to program and exit the DSC menu.
To Next Page
Loading...
