21
6
DSC OPERATION
New2001
6
r Push [Y] or [Z] to select the desired intership channel,
and push [DSC•
POS].
• Channel 70 is selected and “” appears.
t Push [DSC•POS] to transmit the Group call.
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
• Routine category only is available.
y After the Group call has been transmitted, the display
changes to the previously selected channel.
u Push and hold [PTT] to communicate your message to the
responding ship.
!IC-M302-1.qxd 03.10.27 9:07 AM Page 21 (1,1)
To Next Page
Loading...
