Icom IC-M33

9
4
BASIC OPERATION
4
D U�S�A�, International, Canadian and ATIS channels
The transceiver is pre-programmed with U.S.A.*
1
, International,
Canadian*
2
and ATIS*
3
channels. These channel groups may
be specified for the operating area.
q Push [CH] to select a regular channel.
w Push and hold [CH] for 1 sec. to change the channel
group. Repeat to advance to the next group .
• The usable channel groups are different, depending on the
transceiver version.
e Push [Y]/[Z] to select a channel.
 •“DUP” appears for duplex channels.
*
1
U.K. and China versions only. *
2
China version only.
*
3
German and Holland versions only.
For U�K� version
For German and Holland versions
For China version
Push and hold
for 1 sec.
U.S.A. channels
International channels
Canadian channels
U.S.A. channels
Push and hold
for 1 sec.
International channels
Push and hold
for 1 sec.
International channels
ATIS channels