Icom IC-M33

18
7
SET MODE
■ Set mode items
D Beep tone function “bP”
Select the key touch beep sound from ON or US, or turn
sound OFF.
•US :Thepresetbeeps(e.g.do,re,mi)sound
•ON :Axedbeepsounds
•OFF :Silentoperation
D Priority scan function “Pr”
(Not available with Holland version)
The transceiver has 2 scan types— normal (OFF) and prior-
ity (ON) scans. Normal scan searches all TAG channels in
the selected channel group. Priority scan searches all TAG
channels in sequence while monitoring Channel 16.
D Scan resume timer “St”
(Not available with Holland version)
The scan resume timer can be set as a pause (OFF) or timer
scan (ON). When OFF is selected, the scan pauses until a
received signal disappears. When ON is selected, the scan
pauses for 5 sec. after receiving a signal and then resumes
even if the signal is being received.
Push
Scan resume timer OFF
(default)
Scan resume timer ON
D Auto scan function “AS”
(Not available with Holland version)
The auto scan function starts the desired scan automatically
when no signal is received, and no operation is performed
for 30 sec.
Push
Normal scan Priority scan (default)
Push
Beep tone ON (default) Beep tone OFF
Push
Auto scan OFF (default) Auto scan ON