Icom IC-M504 Instruction Manual

48
6
DSC OPERATION
D Automatic acknowledgement
This item sets the automatic acknowledgement function to
ON or OFF.
When a position request, position report or polling request
call is received, the transceiver automatically transmits a po-
sition request reply, position report reply or polling reply call,
respectively.
q Push [MENU] to enter the DSC menu.
w Rotate [DIAL] to select “Set up,” push [DIAL•ENTER].
e Rotate [DIAL]
to select “Auto ACK,” p u s h
[DIAL•ENTER]
.
r Rotate [DIAL] to turn the automatic acknowledgement
function ON or OFF
.
t Push [DIAL•ENTER] to set the condition.
 •Push[CLR] to cancel and return to the set up menu.
--DSC Menu--
Select Item
Add:Group ID
DEL:INDV ID
DEL:Group ID
Offset Time
MMSI Check
˘Auto ACK
--DSC Menu--
Auto ACK
˘ON
OFF
<CLR˘Exit / ENT˘OK>
--DSC Menu--
Select Item
POS Report Reply
Polling Request
Polling Reply
Received Calls
Distress Setting
˘Set up

Icom IC-M504 Specifications

General

Brand	Icom
Model	IC-M504
Category	Transceiver
Language	English