Icom IC-M94DE - ATIS ID Entry; Entering the ATIS Identification Number

12
5
PREPARATIONS
5
7
10
15
18
8
13
11
16
9
14
6
12
17
1
4
2
3
■ Entering the ATIS ID
(For the HOL and FRG versions)
The Automatic Transmitter Identication System (ATIS) ID
consists of 10 digits. You can enter the ID in the “ATIS ID Input”
item on the Menu screen.
This ID entering can be done only once.
After entering, it can be changed only by your dealer or
distributor. If your ATIS ID has already been entered, this entry
is not necessary.
1. Push [MENU].
• The Menu screen is displayed.
2. Push [▲] or [▼] to select “ATIS ID Input,” and then push
[ENT] to start entering.
• The “ATIS ID Input” screen is displayed.
3. Enter your ATIS ID.
TIP:
• Select a number using [◄] and [►].
• Push [ENT] to enter the selected number.
• Select “←” or “→,” to move the cursor.
4. Repeat step 3 to enter all 10 digits.
5. Select “Finish,” and then push [ENT] to set the entered ID.
• The “Conrmation” screen is displayed.
6. Enter your ATIS ID again to confirm.
• When a di󰀨erent ID is entered from the “ATIS ID Input”
screen, “ATIS ID does not match.” is displayed. Enter a code
again in step 2.
7. Select “Finish,” and then push [ENT] to set the entered ID.
L When your ATIS ID is successfully entered, “ATIS ID
registered successfully.” is briey displayed, and then
returns to the previous screen.
L You can check the ATIS ID in “Radio Info” on the Menu
screen.