Need help?Do you have a question about the Icom IC-M92D and is the answer not in the manual?
General| Type | Handheld VHF Marine Transceiver |
|---|---|
| Display | LCD |
| Battery Type | Li-ion |
| Frequency Range (Rx) | 156.025 - 163.275 MHz |
| Output Power | 5W / 1W |
| Waterproof Rating | IPX7 (1 meter depth for 30 minutes) |
| GPS Functionality | Integrated GPS receiver |
| DSC | Yes |
Steps for initiating distress calls via Channel 16 and DSC.
Instructions for cleaning the transceiver with fresh water after saltwater contact.
Introduction to the Icom IC-M92D VHF Marine Transceiver.
Explanation of warning, caution, and note terminology.
Summary of the transceiver's key capabilities and functions.
Crucial warnings and cautions for operating the transceiver safely.
Information regarding compliance with FCC rules for unintentional radiators.
Rules for channel priorities, privacy, and obtaining necessary radio licenses.
Details on accessories like handstrap, battery pack, and belt clip.
Instructions for attaching the flexible antenna and belt clip.
Guidelines for safely removing and attaching the battery pack.
Identification and function of the transceiver's external controls and indicators.
Explanation of icons, readouts, and status indicators on the transceiver's function display.
Detailed descriptions of various indicators such as KEY, TIME ZONE, POSITION, SCAN, and BATTERY.
Procedure for programming and verifying the MMSI code on the transceiver.
How to select channels, including Channel 16 and call channels.
Guide to choosing different channel groups based on operating area.
Instructions for selecting weather channels and setting up weather alerts.
How to transmit and receive calls, including volume and squelch adjustments.
Steps to program and adjust call channels for quick recall.
Procedures for setting optimal volume and squelch levels.
How to temporarily activate volume loud and mute features.
Using the key lock, monitor function, and AquaQuake water draining.
Adding or clearing TAG channels to customize scanning.
Procedure for labeling channels with alphanumeric names.
How to adjust the brightness level of the transceiver's display and keys.
Explanation of Priority and Normal scan modes for signal detection.
Steps to start, stop, and manage scanning operations on the transceiver.
How Dualwatch and Tri-watch functions monitor channels simultaneously.
Steps to activate and use Dualwatch and Tri-watch modes.
Programming and managing individual and group DSC addresses.
Procedure for programming and naming group DSC addresses.
How to remove programmed individual and group DSC IDs.
Guide to manually inputting ship's position and UTC time.
Step-by-step guide to making a distress call on Channel 16.
How to transmit a distress cancel call after sending an alert.
How to select and transmit distress calls with specific nature of distress.
Guide to sending a DSC signal to a specific station.
Choosing the appropriate intership channel for individual DSC calls.
Methods for sending acknowledgements to individual DSC calls.
Using the menu system to send manual acknowledgements for individual calls.
Procedure for sending DSC signals to a specific group of stations.
Steps to confirm and send group DSC calls.
How to announce messages to all ships within range using DSC.
Guide to requesting a specific ship's current position via DSC.
How to send a DSC call reporting your current position.
Procedure for replying to a received Position Request call.
Sending manual replies to position requests, including editing data.
How to send a DSC call as a reply to a Position Report Request.
Sending manual replies to position report requests via DSC.
Procedure for sending a DSC call as a reply to a Polling Request.
Sending manual replies to polling requests using the DSC system.
How to initiate test DSC calls between stations.
Steps to confirm and transmit a DSC test call.
Procedure for sending acknowledgements to DSC test calls.
Sending manual acknowledgements for received test DSC calls.
Alerts and actions upon receiving a DSC distress call.
Handling DSC messages acknowledging a distress call.
Actions upon receiving a DSC call relaying a distress message.
Handling DSC messages acknowledging a distress relay call.
Alerts and actions upon receiving an individual DSC call.
Alerts and actions upon receiving a group DSC call.
Alerts and actions upon receiving an All Ships DSC call.
Alerts and actions upon receiving a geographical area DSC call.
Alerts and actions upon receiving a DSC position request.
Alerts and actions upon receiving a DSC position report.
Alerts and actions upon receiving a DSC polling request.
Alerts and actions upon receiving a DSC test call.
Alerts and actions upon receiving a DSC test acknowledgement.
How to access and view the history of transmitted DSC calls.
How to view distress messages stored in the received call log.
Setting up automatic replies for various DSC call types.
Important warnings and precautions regarding lithium-ion battery use and charging.
Information on regular and rapid charging options for the battery pack.
Details on the multi-unit rapid charging system for battery packs.
Detailed technical specifications for the transceiver's performance.
List of optional accessories designed for use with the transceiver.
Guidelines to ensure safe exposure to RF electromagnetic energy during operation.
Information on potential interference caused by radio transmissions.
To Next Page
