Icom IC-M92D - Test Acknowledgement Call Reception; Receiving Test Acknowledgement DSC Calls

63
8
DSC OPERATION
Receiving a Test Acknowledgement Call D
When a Test Acknowledgement Call is received:
➥ The emergency alarm sounds for 2 minutes.
➥ “RCVD TEST ACK” pops up. The LCD backlight blinks for
2 minutes.
Push [ALARM OFF] to stop the alarm and the backlight q
blinking.
 •Ifyouhaven’tpushed[ALARMOFF]within2minutes,thenext
screen automatically appears.
Push either softkey to select a desired action. w
[EXIT]
➥Push to ignore the Call and return to the normal operat-
ing mode.
  •ThetransceiverexitstheDSCmode.
  •“ ” continues to blink and the Call is stored in the Re-
ceived Call Log.
Transmitted Call log ■
The transceiver automatically stores up to 50 transmitted
calls, and the logs can be used as a supplement to your log-
book.
Enter “TX CALL LOG” in the DSC CALLS menu. q
MENU ➪ DSC Calls ➪ Transmitted Call Log
(Push [MENU]) (Push [p]/[q] , then push [ENT].)
Push [ w p] or [q] to select the desired item, then push
[ENT].
Push e [p] or [q] to scroll the message contents.
To delete the displayed message, push [DEL]. r
 •Theconrmationscreenappears,thenpush[OK]todelete.
Push [EXIT] to return to the normal operating mode. t