Icom IC-M92D - 14 Specifications and Optional Equipment; Transceiver Technical Specifications

72
14
SPECIFICATIONS AND OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Specifications ■
General D
•Frequencycoverage :Tx156.025–157.425MHz
Rx 156.050–163.275 MHz
•Mode :
FM (16K0G3E),
DSC (16K0G2B)
•Channelspacing : ±25 kHz
•Operatingtemp.range :–20°Cto+60°C
•Currentdrain(at7.4V) :TXhigh 1.5A
(approximately) Max. audio 0.50 A
•Powersupplyrequirement :7.4VDCnorminal
(negative ground)
•Frequencystability :±10PPM(–20°Cto+60°C)
•Antennaimpedance :50˘ nominal
•Dimensions(approximately):
61.2(W) × 141.4(H) × 43.2(D)mm
: 2.4(W) × 5.6(H) × 1.7(D) inch
(Projections not included)
•Weight (approximately) : 295 g/10.4 oz with BP-275
Transmitter D
•Outputpower :5W/1W
•Modulationsystem :Variablereactancefrequency
modulation
•Max.frequencydeviation :±5.0kHz
•Adjacentchannelpower :70dB
•Spuriousemissions :-68dBc(typical)
Receiver D
•Sensitivity(12dBSINAD) :0.25µV(typical)
•Squelchsensitivity :0.35µVtypical(atthreshold)
•Intermodulationrejectionratio:70dB(typical)
•
Spurious response rejection ratio :
70 dB (typical)
•Adjacentchannelselectivity :70dB(typical)
•Audiooutputpower :
0.35 W typical at 10% distor-
tion with an 8 ˘ load (External)
: 0.7 W typical at 10% distortion
with an 8 ˘
load (Internal)
All stated specifications are subject to change without notice
or obligation.