8
4
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MMSI code programming ■
The 9 digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
NOTE:
•This initial code programming can be performed only the
first time to turn the power ON.
•Theprogrammingcanonlybedoneonce.
•After the programming is completed, it can be re-pro-
grammed only by your dealer or distributor.
First, push q [
] turn ON the power.
•Theopeningdisplayappears.
•“MMSI” display appears and warning alarm sounds for 2
seconds.
“Push [ w ENT] to Register Your MMSI” appears.
•Donotpush[CLEAR] while this screen is displayed.
Push e [Y]/[Z]/[Ω]/[≈] to select and input with [ENTER].
r Select “FINISH” and push [ENTER] to register.
t When “MMSI CONFIRMATION” screen appears, input the
previously registered 9 digited code to confirm the regis-
tration. Then, push [ENTER] to register.
•Automatically enters the functional mode if the registration is
valid.
MMSI code check D
The 9 digit MMSI code can be checked.
Push q [MENU].
Push w [Y]/[Z] several times to select “MMSI/GPS Info”,
then push [ENTER] to enter.
Select “ e EXIT” to return to the main menu screen or “BACK”
to return to the previous screen.
To Next Page
Loading...
Need help?
General
