53
8
DSC OPERATION
Receiving an Individual Call D
When an Individual Call is received:
➥ T he emergency alarm sounds for 2 minutes, depending on
the received Category.
➥ “RCVD INDIVIDUAL CALL” pops up. The LCD backlight
blinks for 2 minutes, depending on the received Category.
Push [ALARM OFF] to stop the alarm and the backlight q
blinking.
•Ifyouhaven’tpushed[ALARMOFF]within2minutes,thenext
screen automatically appears, depending on the received Cat-
egory.
Push either softkey to select a desired action. w
[EXIT]
➥
Push to ignore the Call and return to the normal operating
mode.
•ThetransceiverexitstheDSCmode.
•TheCallisstoredintheReceivedCallLog.
•“ ” continues to blink and the Call is stored in the Re-
ceived Call Log.
[INFO]
➥Push to display the Received call information. (p. 59)
[ACK]
➥ Push to display the “INDIVIDUAL ACK” screen to re-
ply to the Call, and select the channel specified by the
calling station for voice communication, depending on
your situation. See page 30 for details of the Individual
Acknowledgement procedure.
When “INDIVIDUAL ACK” is set to “Auto ACK (Unable),”
the transceiver automatically replies to the Call. In that
case, both the TX and RX calls are stored in the Transmit-
ted and Received Call Logs.
To Next Page
Loading...
Need help?
General
