Icom IC-M92D - Geographical Area Call Reception; Receiving Geographical Area DSC Calls

56
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Receiving a Geographical Area Call D
When a Geographical Area Call (for the area you are in) is
received:
➥ The emergency alarm sounds for 2 minutes, depending on
the received Category.
➥ “RCVD GEOGRAPHICAL CALL” pops up. The LCD back-
light blinks for 2 minutes, depending on the received Cat-
egory.
Push [ALARM OFF] to stop the alarm and the backlight q
blinking.
 •Ifyouhaven’tpushed[ALARMOFF]within2minutes,thenext
screen automatically appears, depending on the received Cat-
egory.
Push either softkey to select a desired action. w
[EXIT]
➥Push to ignore the Call and return to the normal operat-
ing mode.
  •ThetransceiverexitstheDSCmode.
  •“ ” continues to blink and the Call is stored in the Re-
ceived Call Log.
[INFO]
➥Push to display the Received call information. (p. 59)
[CH xx*]
* xx is specified by the calling station.
➥ Push to monitor the specified channel for an announce-
ment from the calling station.
When no GPS receiver is connected or if there is a prob-
lem with the connected receiver, all Geographical Area
Calls are received, regardless of your position.