Icom IC-M92D - Position Report Reply Calls; Transmitting Position Report Reply DSC Calls

41
8
DSC OPERATION
Transmitting a Position Report Reply call D
Transmit a Position Report Reply call when a Position Report
Request call is received.
Quick Reply:
When q a Position Report Request call is received, beeps
sound and the screen as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
•Push[INFO]todisplaythePositionReportRequestcallinfor-
mation.
Push [BACK] to return to the previous screen, or push [ACK].
The Position Report Reply confirmation screen is dis- e
played.
Push [CALL] to transmit the reply call.
While transmitting the reply call, the screen as shown be- r
low is displayed, and then returns to the normal operating
mode.