Icom IC-M92D - Test Call Transmission Process; Confirming and Sending Test Calls

46
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push [CALL] to transmit the Test call. r
 •IfChannel70isbusy,thetransceiverstandsbyuntilthechan-
nel becomes clear.
After the Test call has been transmitted, the following t
screen is displayed.
When the acknowledgement call is received, beeps sound y
and the following screen is displayed.
Push [ALARM OFF] to stop the beeps, and then the screen u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode. i