Icom IC-M92D - Test Acknowledgement Details; Manual Acknowledgement for Test Calls

48
8
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Manual ACK:
Enter “TEST ACK” in the DSC CALLS menu. q
 •IfnoTestcallhasbeenreceived,the“TESTACK”itemwillnot
be displayed.
Select a desired Test call to reply to, using [ w Y]/[Z], then
push [ENT].
The Test ACK confirmation screen is displayed. e
Push [CALL] to transmit the acknowledgement call.
While transmitting the acknowledgement call, the screen r
as shown below is displayed, and then returns to the nor-
mal operating mode.
MENU ➪ DSC Calls ➪ Test ACK
(Push [MENU]) (Push [Y]/[Z] , then push [ENT].)