Icom IC-M92D - DSC Call Acknowledgements; Transmitting Individual Call Acknowledgements

29
8
DSC OPERATION
Transmitting an Individual Acknowledgement D
When receiving an Individual call, you can transmit an ac-
knowledgement (‘Able to Comply,’ ‘Propose New Channel’ or
‘Unable to Comply’) by using the on-screen prompts (Quick
ACK.) Also, you can send an acknowledgement through the
MENU system (Man ual ACK.)
Quick ACK:
When q an Individual call is received, beeps sound and the
screen as shown below is displayed.
Push [ALARM OFF] to stop the beeps.
Push [ACK]. w
Select one of three options, then push [ENT]. e
 •AbletoComply :Makeanacknowledgmentcallwithout
any changes.
 •UnabletoComply :You cannot make an acknowledge-
ment call.
The Acknowledgement call (‘Unable
to Comply’) can be automatically
transmitted, if set. See page 61 for de-
tails.
 •ProposeNewChannel:You can make an acknowledgement
call, but you specify the intership
channel. Select a desired intership
channel, using Dial, or [Y](CH)/[Z]
(CH), then push [ENT].