Icom ID-880H

X
QUICK REFERENCE GUIDE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
N Repeater operation
1. Setting duplex
± Push [BAND] then rotate [DIAL] to select the frequency
band. Then rotate [DIAL] to select the repeater frequency.
± Push and hold [DUP](LOW) for 1 sec. then rotate [DIAL]
to select minus duplex or plus duplex.
• The USA version has an auto repeater function, therefore, set-
ting duplex is not required.
[DUP][DIAL]
2. Repeater tone
Push and hold [TONE](M/CALL) for 1 sec. then rotate [DIAL]
to select “TONE,” if the repeater requires a subaudible tone
to be accessed.
[TONE][DIAL]
Using the HM-133
Plus or minus duplex selection and the repeater tone setting
can be made easily via the HM-133.
Push [
DUP– 7(TONE)] for minus duplex; [DUP+ 8(TSQLS)]
for plus duplex selection, push [FUNC] then [
DUP– 7(TONE)]
to turn the repeater tone ON.
Push
Push , then
Push