Icom ID-880H

13
2
BASIC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
D Call/Weather* channels
Call channels are used for quick recall of most-often used
frequencies. *Weather channels are available for the U.S.A.
version only.
q Push [M/CALL] several times to select call channels/
Weather channels.
• Memory/Call/Weather channels can be selected in sequence.
• “C0” or “C1” appears when call channel is selected.
w Rotate [DIAL] to select the desired channel.
[M/CALL]
• Call channel indication
• Weather channel indication
MR/CALL
Y/Z
z Push and hold [MR/CALL] for 1 sec. to se-
lect call channels.
• Whether channels cannot be selected by the
HM-133.
x Push [] or [] to select the desired call
channel.
D DR (D-STAR Repeater) mode
DR (D-STAR Repeater) mode is used for the D-STAR re-
peater operation. In this mode, you can select the pre-pro-
grammed repeaters and UR (your) call sign easily.
q Push [DR] to select DR mode.
• “ ” appears when call channel is selected.
[DR]
• DR mode indication
Appear
w Rotate [DIAL] to select the desired access repeater.
• While rotating [DIAL], S/RF-meter indicates group number.
• Only programmed access repeaters in RPT-L menu can be se-
lected. See p. 40 for RPT-L (repeter lists) programming details.
MENU ¶RPT-L ¶ADD-L (p. 40)