Icom ID-RP2010V - Disassembly Instruction

3-1
SECTION 3 DISASSEMBLY INSTRUCTION
1. Removing the FRONT-R and FRONT-L UNITS
1) Remove the 7 screws from the top cover, then remove the
top cover from the repeater chassis.
2) Remove the 10 screws and the 4 cables from the
FRONT-R and FRONT-L UNITS.
3) Remove the FRONT-R and FRONT-L UNITS from the
repeater chassis.
2. Removing the RF UNIT ASSEMBLY
1) Remove the 2 screws from the rear panel of the repeater
chassis.
FRONT-L UNITFRONT-L UNIT
FRONT-R UNITFRONT-R UNIT
×5 screws
×5 screws
J1
J51
J1801
J1801
J1255
J2002
7 screws
Top cover
Repeater chassis
FRONT-L UNITFRONT-L UNIT
FRONT-R UNITFRONT-R UNIT
Repeater chassis
×4 screws
RF UNIT ASSEMBLY
2 screws
RF UNIT ASSEMBLY
Repeater chassis
2) Remove the 4 screws from the RF UNIT ASSEMBLY.
3) Remove the RF UNIT ASSEMBLY from the repeater
chassis.