Icom ID-RP2010V - Interface Information

5-1
SECTION 5 INTERFACE INFORMATION
[LAN 1]
[LAN 1] Indication Description Specification
21
1LINK/ACT
• Lights when a cable is connected.
• Does not light when a cable is not connected.
• Blinks while communicating.
Connects to a Gateway
server when operating in the
Gateway repeater mode.
2SPEED
• Lights while communicating in 100BASE-TX.
• Does not light while communicating.
• Blinks while communicating in 10BASE-T, or not
connected.
[LAN 2]
[LAN 2] Indication Description Specification
21
1LINK/ACT
• Lights when a cable is connected.
• Does not light when a cable is not connected.
• Blinks while communicating.
Connects to a Gateway server
when operating in the LTE
mode.
L An optional LTE unit is required.
2SPEED
• Lights while communicating in 100BASE-TX.
• Does not light while communicating.
• Blinks while communicating in 10BASE-T, or not
connected.
[LAN 1] [LAN 2]
• FRONT PANEL