EasyManua.ls Logo

Icom ID-RP2010V - Software and Mode Settings; Utility Software Connection; DV;DD Switch Operation

Icom ID-RP2010V
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-1
SECTION 4 OPTIONAL PRODUCT INSTALLATION
SUPPLIED ACCESSORIES
4-1 INSTALLING THE LTE MODULE (UX-262)
LTE antennas*
(Cable length: 3 m, 9.8 ft)
*Includes a cleaning cloth

(7.5 × 80 mm, 0.3 × 3.1 in)
Coaxial cables
(Cable length: 30 cm, 11.8 in)

(For only the USA version)
D Preparation

The system with a single repeater:
Confirm the repeater is connected to a Gateway Server.
The system with multiple repeaters:
Install the unit to a repeater that is connected to a Gateway Server.

connected to other repeaters.
About the certication sticker:

CAUTION: DO NOT
NOTE: Place the repeater within reach of the antenna cables to paste the LTE antennas on a window glass.
NOTE: For the latest information, refer to the UX-262 SETTING GUIDE that is available from the Extranet.

Other manuals for Icom ID-RP2010V

Related product manuals