Icom MR-1200RII - 13 Specifications; Display Unit

13
41
SPECIFICATIONS
D General
• Minimum range: 25 m; 82 ft (when measurement range is
1
⁄8 NM)
• Maximum range: 36 NM (MR-1200RII; when measurement range is 36 NM)
48 NM (MR-1200TII; when measurement range is 48 NM)
72 NM (MR-1200TIII; when measurement range is 72 NM)
• Measurement range:
1
⁄8,
1
⁄4,
1
⁄2,
3
⁄4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36, 48*,
64
†
, 72
†
(NM) *only MR-1200TII/TIII,
†
MR-1200TIII
• Preheat time: 90 seconds
• Connection length between display and scanner unit: 15 m; 49.2 ft (MR-1200RII),
20 m; 65.6 ft (MR-1200TII/TIII, optional for MR-1200RII),
30 m; 98.4 ft (optional)
D Display unit
• LCD display: 12.1-inch TFT LCD display
• Pixels: 600×800 dot
• LCD mounting: Vertical
• Input: NMEA 0183 format (for navigation receiver),
N+1 format (uxgate compass sensor),
AUX,
IEC61162-2 format (for AIS unit)
• Output: NMEA 0183 format
• Power supply requirement: 10.2 to 42 V DC
• Power consumption (at zero wind velocity): Approximately 60 W (MR-1200RII)
Approximately 70 W (MR-1200TII)
Approximately 80 W (MR-1200TIII)
• Usable temperature range: –15˚C to +55˚C; +5˚F to 131˚F
• Dimensions (Mounting bracket is included):
300 (W) ×323 (H)×119.2 (D) mm,
(Projections are not included) 11.8 (W)×12.7 (H)×4.7 (D) in
• Weight (Mounting bracket is included): Approximately 4.3 kg; 9.5 lb