ICON A5-B - Page 58

4-2 NORMAL PROCEDURES / PREFLIGHT INSPECTION
ICON A5-B / PILOT’S OPERATING HANDBOOK CHANGE A2
CHAPTER 4
FIGURE 4-1
PREFLIGHT INSPECTION PROCESS
4.1.1 (1) CABIN
1. Baggage Area—SECURE stored items
2. Throttle Lever—CHECK freedom of motion
3. Controls—CHECK freedom of motion to all stops
4. Landing Gear Switch—VISUALLY CHECK DOWN (land)/UP
(water)
5. Rudder Pedal Area and Parking Brake—CHECK clear and no
fluid leaks
6. Master Switch—ON
7. Strobe Lights—VERIFY all lights illuminate
8. Fuel Quantity—CHECK/CONFIRM
9. Landing Gear Position Indicator—VISUALLY VERIFY DOWN
(land)/UP (water)
10. Bilge Pump—ON (verify operation & bilge empty)/OFF
11. Water Rudder—VISUALLY inspect and VERIFY operation
12. Circuit Breakers and Fuses—CHECK IN and NONE LIT
13. Master Switch—OFF
10 2
9
8
7
6
5
4
3
1
11