ICP N9MSB - Combustion-Air and Vent Pipe Materials; Approved Materials Table; Vent Coupling and Adapter Figures

Approved Combustion-Air and Vent Pipe, Fitting and Cement Materials (U.S.A. Installation)
Table 13
ASTM
SPECIFICATION
(MARKEDON
MATERIAL)
D1527
D1785
D2235
D2241
D2466
D2468
D2564
D2661
D2665
F438
F441
F442
F493
F628
F656
F891
MATERIAL PIPE FITTINGS
ABS Pipe -
PVC Pipe -
For ABS - -
PVC Pipe -
PVC - Fittings
ABS - Fittings
For PVC - -
ABS Pipe Fittings
PVC Pipe Fittings
CPVC - Fittings
CPVC Pipe -
CPVC Pipe -
For CPVC - -
ABS Pipe
For PVC
PVC Pipe
Vent Coupling and Adapter with
Figure 41
Gaskets
Attach gaskets to vent pipe and combustion air adapters
L
Vent Couplingand Adapter
Al1314
SOLVENT CEMENT AND
PRIMERS
Solvent Cement
Solvent Cement
Solvent Cement
Primer
Figure 42
DESCRIPTION
Schedule-40
Schedule-40
For ABS
SDR-21 & SDR-26
Schedule-40
Schedule-40
For PVC
DWV at Schedule-40 IPS sizes
DWV
Schedule-40
Schedule-40
SDR
For CPVC
Cellular Core DWV at Schedule-40 IPS
sizes
For PVC
Cellular Core Schedule-40 & DWV
Vent Pipe Flush with Adaptor
VENT PIPE ADAPTER WITH GASKET
INSTALLED ON FURNACE VENT
PIPE IS CUT FLUSH WITH TOP OF
ADAPTER.
A11339A
Figure 43 _Vent Pipe Flush Showing Coupling
ALIGN NOTCHES IN VENT PIPE COUPLING OVER STAND-
OFF ON ADAPTER. TORQUE LOWER CLAMP 15 LB-IN. WHEN
REMAINING VENT PIPE IS INSTALLED, TORQUE UPPER
CLAMP TO 15 LB-IN.
A11889B
38 Specificationssubjectto change without notice. 440 01 4101 03