ICP NTG3/FBF User Manual

START-UP CHECK SHEET
(Keep this page for future reference)
Dealer Name:
Address:
City, State(Province), Zip or Postal Code:
Business Card Here
Phone:
Owner Name:
Address:
City, State(Province), Zip or Postal Code:
Model Number:
Serial Number:
Natural: [_1 LP: [_1
Type of Gas:
Blower Motor H,P,:
Supply Voltage:.
Limit Opens at...(°F)__.or(°C)
Limit Closes at...(°F) or(°C)
Which blower speed tap is used?
(Heating) (Cooling).
Temperature of Supply Air: (°F) or(°C)
Temperature of Return Air: (°F)___or(°C)
Rise (Supply Temp,-Return Temp,): (°F) or(°C).__
Filter Type and Size:
Fan "Time ON" Setting:
Fan "Time OFF" Setting:
Manual Gas Shut-Off Upstream
of Furnace!Drip-Leg? YES [_1 NO [_1
Dealer Comments:
Drip-Leg Upstream of Gas Valve?
Condensate Drain Connected? YES [_
Condensate Drain Trapped? YES [_
YES _1 NO _1
Noel
NO_1
Horizontal Condensate Switch Installed? YES [_ NO [_
Blower Speed Checked? YES [_ NO [_
All Electrical Connections Tight? YES [_ NO [_
Gas Valve OK? YES [_ NO [_
Measured Line Pressure When Firing Unit:
Calculated Firing Rate: (See Checks and Adjustments Sec-
tion),
Measured Manifold Pressure:
Thermostat OK? YES [_1
Subbase Level? YES [_1
Anticipator Set? YES [_1
Breaker On? YES [_1
Date of Installation:
Date of Start - Up:
NOel
NO_1
NO _1 Set At?:
Noel
I_] 441 012603 02

ICP NTG3/FBF Specifications

General

Brand	ICP
Model	NTG3/FBF
Category	Furnace
Language	English