ICS 695XL Service Manual

©2017 ICS - Blount Inc, Specications subject to change without notice. REV19JUNE2017 P/N 598901
70
695XL SERVICE MANUAL
20.22
Heat crankcase halves to 150°F (65.5°)
C. Use the shaft sleeve and soft mallet to
tap out both bearings.
20.24
Place the bearing on the bearing support
plate. Holding the bearing support plate
under the crankcase half.
20.23
Bearing installation.
Bearing press tools.
20. CRANKCASE

ICS 695XL Specifications

General

Brand	ICS
Model	695XL
Category	Chainsaw
Language	English