ICS 695XL Service Manual

©2017 ICS - Blount Inc, Specications subject to change without notice. REV19JUNE2017 P/N 598901
71
695XL SERVICE MANUAL
20.25
Place the screw with nut and washers
through the crankcase support plate and
thread into the bearing support plate.
20.27
Bearing Tools.
Shaft Sleeve.
Shaft Mandrels.
20.26
Hold the screw in place and turn the nut
until the bearing stops against the
crankcase.
Repeat the process for the other half of
the crankcase.
20. CRANKCASE

ICS 695XL Specifications

General

Brand	ICS
Model	695XL
Category	Chainsaw
Language	English