To Next Page

To Previous Page

695XL SERVICE MANUAL

24.8

Testing the fuel tank breather.

Attach the pressure gauge to the fuel

tank plug. Plug the fuel line at the

carburetor end. Pressurize the tube to 4.5

psi (0.3 bar).

The pressure should reduce to nearly 0

psi (0 bar) over a period of 3 seconds.

24.10

Inspect the fuel purge circuit.

Inspect the purge bulb for leaks or

damage. Replace if damaged. See fuel

tank section.

24.9

If the pressure does not release,

disassemble or replace the breather.

24. FUEL SYSTEM

24.11

Inspect fuel purge lines and one way

purge valve for leaks or damage. The

arrow is the purge ow direction.

Replace if damaged. See fuel tank

section.

Other manuals for ICS 695XL

Questions and Answers:

Need help?

Do you have a question about the ICS 695XL and is the answer not in the manual?

General