TUNNEL MASTER JR MANUAL
Operating Procedures 60
Main Wash Menu
Introduction
After setting up the various wash settings and services the user is now
ready to wash cars. The main wash menu is where many of the day to day
activities will be performed. It is important to train personnel in the proper
selection of these menu options to assure accurate shift reporting and to
review operations.
Menu
Options
The following is a list of menu options in the Main Wash menu and a brief
explanation of their function.
Item Menu Option Function
1 Shift Break When selected this menu option will print a
report, if a report printer is attached, and ask
if the operator wishes to close (Bump) the
current shift.
2 Wet Down Wash This option allows the user to activate any
equipment outputs, which have been
designated to activate whenever the operator
chooses this wetdown option.
3 Configure Wash Allows user to configure wash settings ans
services, explained in-depth in Chapter 2.
4 View Counts This menu gives the ability to view counts,
number of times the various services have
been processed during the current shift
5 Print Reports From this menu option a user can print
various financial reports, if there is an
optional report printer attached to the
controller.
To Next Page
Loading...
Need help?
General