26 Innovative Circuit Technology Ltd.
When using a dynamic IP address the router’s WAN IP address may change
from time to time without warning, depending on your ISP. In this case you
should obtain a Static IP address from your ISP (it will not change) which will
ensure more predictable access to the PDU from a remote location. If a
static IP address is not available you can use a Dynamic DNS service such as
Dyn (www.dyn.com) to provide a stable address for the router.
5. To access the PDU over the internet type the WAN IP address of the
router in the location/address field of your browser, followed by a colon
and the HTTP port number the PDU is using. (e.g.
http://209.123.10.33:8000 for a router address 209.123.10.33, port
8000)
Figure 7: PDU Access With Router Address
TEXT MESSAGE ALARM NOTIFICATIONS
The PDU can send alarm notifications as text messages to a cell phone by
configuring the alarm e-mails to be sent to your mobile phone service provider.
On the E-mail Setup page of the web based utility enter the address of your
phone in the Recipient E-mail Address field.
Example with an AT&T phone: enter the recipient address
cellnumber@txt.att.net, replacing cellnumber with your 10 digit cell phone
number.
Cell address formats for some common North American mobile phone providers:
AT&T cellnumber@txt.att.net
Verizon cellnumber@vtext.com
Sprint cellnumber@messaging.sprintpcs.com
T-Mobile cellnumber@tmomail.net
Virgin Mobile cellnumber@vmobl.com
Nextel cellnumber@messaging.nextel.com
Bell Mobility cellnumber@txt.bell.ca
Rogers cellnumber@pcs.rogers.com
Telus cellnumber@msg.telus.com
Virgin Mobile (Can) cellnumber@vmobile.ca
To Next Page
Loading...
Need help?
General
