EN Comfosplit IKARO HW - User and installer manual
© Ideal Clima - Page 40 / 68
Make sure that the safety devices are operating properly and have no doubts about their functioning;
otherwise not start in any case the unit;
Only use tools specified by the drive manufacturer. To avoid injury, do not use worn or damaged tools,
poor quality or improvised;
- carry out the cleaning unit, the operator must verify that there are not worn or damaged parts
or not firmly attached, otherwise request the intervention of technical maintenance;
It is forbidden the use of flammable fluids during cleaning operations.
For cleaning the unit does not use diesel, petrol or solvents as the former leave an oily layer that promotes
adhesion of dust, while solvents (although weak) damage the paint and thus favor the formation of rust. If a
water jet penetrates into the electrical equipment as well as inducing oxidation of the contacts, it can cause a
malfunction of the unit. For this reason, do not use water or steam jets on sensors, connectors or any electrical
part.
12.4 INTENDED USE
Place the unit in environments where there is no risk of explosion, corrosion, fire and where there are
no vibrations and electromagnetic fields. Do not operate in a different way from what is indicated,
and neglect not necessary for the security operations.
The device is suitable for heating and cooling of residential and commercial environments, there is provided
the power supply with water, inside plumbing carried out in a workmanlike manner.
12.5 GENERAL SAFETY RULES
PROTECTIVE CLOTHING
Each operator must use personal protective equipment such as gloves, a head protection helmet, safety
glasses, safety shoes and ear defenders against noise.
SAFETY PLATES
Generic alarm burns Danger moving Organs voltage Risk cutting wounds
13 PRODUCT DESCRIPTION
13.1 DESCRIPTION
IKARO HW is the terminal hydronic ideal for renewable energy systems such as heat pumps or solar panels, and,
more generally, for all the heating and cooling systems that use water in low temperature.
Fast, efficient and low thermal inertia, heats, cools and dehumidifies the environments in complete silence.
Find use in high temperature installations for heating only, when the low thermal inertia and noise are important
elements for the choice of the system terminal.
IKARO HW can be mounted in any of the local location, without taking up the space devoted to furniture,
doors and windows; It is easy to install and maintain; It is silent.
To Next Page
Loading...