EN Comfosplit IKARO HW - User and installer manual
© Ideal Clima - Page 58 / 68
19.2 POSITIONING
All models are designed for indoor installation.
Do not install the unit outdoor and avoid that it might be exposed to atmospheric agents such as rain,
hail, fog and frost.
For a correct operation it is necessary to respect the following minimum distances from the device:
Do not place the appliance:
• In direct exposure to sunlight.
• In the vicinity of heat sources.
• In damp areas or with a risk of contact with water.
• In environments with the presence of exhausts and flues from the combustion of diesel and other
hydrocarbons. (It is instead permitted the installation in environments with biomass heat generator such
as pellet stoves and the like).
Verify that the building element on which the unit will be fitted is strong enough to bear the weight, with a
good enough planarity to allow the metal mounting plate to remain straight and which does not present
obstacles airflow for both intake and supply.
To Next Page
Loading...