Comfosplit IKARO HW – User and Installer manual EN
© Ideal Clima - Page 57 of 68
18 DECOMISSIONING
When the unit reaches its end of life and needs to be removed and replaced, the structure
and the various components, if unusable, must be dismantled and divided according to their
waste sort.
19 INSTALLATION
19.1 BACKGROUND
INSPECTION
After receiving the unit, inspect it for damage: the machine left the factory in perfect condition; Any damage
must be questioned to the carrier and recorded on the Delivery Note before signing.
LIFTING AND CARRYING
When unloading and positioning the unit, avoid abrupt or violent handling. Internal handling must be carried
out carefully so as not to use the machine components as gripping points.
In all lifting operations securely anchor the unit, in order to avoid overturning and accidental falls.
UNPACKING
The packaging of the unit must be removed carefully without causing damage to the machine; the materials
constituting the packaging are of different nature, wood, cardboard, nylon, polystyrene, etc. It is good
practice to keep them separate and deliver them to the disposal or any recycling companies responsible for
purpose and thus reduce the environmental impact.
INTEGRITY OF THE APPLIANCE
All operations (installation, fitting, electrical connection, and routine maintenance) are to be
performed without removing the ABS cabinet of the unit. For easy installation and maintenance, it is
therefore not recommended to remove it.
To Next Page
Loading...