iDect X1i System - Your Handsets Name

Your handset’s name
Before you start to use your iDECT X1i handset, especially
if you have a multi-handset system, you’ll probably want
to personalise the display with your name. The name can
have up to eight characters (including spaces).
To change
the name
1 Press the MENU button
è
The display shows PHONEBOOK
2 Press the â button THREE times
è
The display shows SETTING
3 Press the PHONE/OK button
è
The display shows HANDSET SETTING
4 Press the PHONE/OK button
è
The display shows ACOUSTIC SETTING
5 Press the á button once
è The display shows HANDSET NAME and the
current name.
6 Press the PHONE/OK button
è
The display shows ENTER NAME and the
current name.
7 Press the HANG UP button to delete
characters from the current name, then key
in your chosen name
8 When you’ve finished, press the MENU/OK
button
9 Press the HANG UP button to go back to
standby mode
10
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:53:56
Color profile: Generic CMYK printer profile
Composite Default screen