iDect X1i System - Barring Specific Call Types

To bar certain
types of call
1 Select the CALL CONTROL option by pressing
PHONE/OK, then press the â button
è
The display shows CALL LIMIT
2 Press the PHONE/OK button
è
The display shows SELECT H/S HANDSET 1
3 Use the â or á button to go to the
handset number you want, then press the
PHONE/OK button
è
The display shows CALL LIMIT HANDSET 1
and the handset’s current status — either:
GLOBAL — all calls allowed
NATIONAL — no international calls allowed
INTERNAL — intercom calls only; no outgoing
calls
4 Use the â or á button to go to the option
you want, then press the PHONE/OK button
To bar calls to
specified
numbers
Before you turn barring of calls to specified numbers on
and off, you need to set up to three barred numbers.
Each barred number can have up to eight digits.
1 Select the CALL CONTROL option by pressing
PHONE/OK, then press the â button TWICE
è
The display shows CALL BARRING
2 Press the PHONE/OK button
è
The display shows SELECT H/S HANDSET 1
3 Use the â or á button to go to the
handset number you want, then press the
PHONE/OK button
è
The display shows BARRING MODE
Base unit settings
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:06
Color profile: Generic CMYK printer profile
Composite Default screen
Help Line: 0845 345 9677 (Local Call rate) 55