iDect X1i System - Dialling) 17; The Phone Book (Memory Dialling); To Store a Number

The Phone Book (memory dialling)
You can store up to 50 numbers in the Phone Book.
Each number can have up to 32 digits, and can be
stored with a name of up to 20 characters (including
spaces).
To store a
number
1 Press the Phone Book button and hold
it for about 2 seconds*
è
The display shows PHONEBOOK ADD ENTRY
2 Press the PHONE/OK button
è
The display shows ENTER NAME
3 Key in a name** then press the PHONE/OK
button
è
The display shows ENTER NUMBER
4 Key in a number*** and press the MENU/OK
button
è
The display shows the name and STORED
5 Press the HANG UP button to go back to
standby mode
* This is a short-cut method. You can also press the
Phone Book button followed by the MENU button. Or you
can press MENU—PHONE/OK—MENU.
** Refer to the diagram on page 16 if you’re not sure how to
key in text using the numbered keypad.
*** If you use Caller Display, it’s best to store the number with
the full national dialling code, even if it’s a local number.
You’ll still be charged at Local rate when you call the number.
Help Line: 0845 345 9677 (Local Call rate) 17
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:53:57
Color profile: Generic CMYK printer profile
Composite Default screen