Remote operation
When you’re not at home, you can phone your iDECT X1i
to check your messages remotely. First, you need to set
up remote operation using the iDECT X1i’s handset.
The machine has a three-digit PIN (security code)
which you need to key in when you operate it remotely.
The default PIN is 123; you can leave it as 123 or
change it to any 3-digit number.
To change
the PIN
1 Press the MENU button
è
The display shows PHONEBOOK
2 Press the â button FOUR times
è
The display shows TAM
3 Press the PHONE/OK button
4 Press the â button FIVE times
è
The display shows REMOTE CONTROL
5 Press the PHONE/OK button
è
The display shows PIN CHANGE
6 Press the PHONE/OK button
è
The display shows ENTER PIN ORIGINAL
7 Key in the current PIN (default 123) and
press the PHONE/OK button
è
The display shows ENTER PIN NEW
8 Key in your new PIN and press the
PHONE/OK button
è
The display shows ENTER PIN CONFIRM
9 Key in your new PIN again and press the
PHONE/OK button
è
The display goes back to the
REMOTE CONTROL menu
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:03
Color profile: Generic CMYK printer profile
Composite Default screen
Help Line: 0845 345 9677 (Local Call rate) 41
To Next Page
Loading...
