Using a multi-handset system
If you have an iDECT X1i multi-handset system, you
already have more than one handset registered to your
base unit. You can register additional handsets — up to
four per base unit. With two or more handsets, you can:
■
make intercom calls from one handset to another
■
transfer an outside call from one handset to another
■
shuttle between an outside call and an intercom call
■
set up a three-way conference call
Each handset’s number (1 to 4) is shown on its display.
!
Only one handset can be connected to the outside
line at once. If you try to make a call while another
handset is already on the line, you’ll hear Busy tone.
To make an
intercom call
There are two ways to make an intercom call.
First method:
1 Press and hold the INT/# button for 2
seconds until
INTERCOM is shown on the
display
2 Use the á or â button to scroll through
available handset numbers, then press the
PHONE/OK button
è
The other handset rings, and its display
shows
INTERNAL FROM # (with your handset
number). When the other handset user
answers, you’ll be connected.
Second method:
1 Press the MENU button then the â button
TWICE
è
The display shows INTERNAL CALL
2 Press the PHONE/OK button
è
INTERCOM appears on the display, and you
can carry on to select the handset number
(step 2 of the first method).
Help Line: 0845 345 9677 (Local Call rate) 23
E:\Binatone2006\iDECT_X1i\iDECT_X1i_UK_03.vp
12 June 2006 10:54:00
Color profile: Generic CMYK printer profile
Composite Default screen
To Next Page
Loading...
