Identix rPad - Advanced RAW Mode Commands; Reporting RSSI Data; Retrieving Current Configuration

MiniPad – rPad User Guide
21
© 2015-2017 – Identix Inc. All Rights Reserved.
5) For example, if you want to have the RSSI data reported along with the tags inventory data,
just enter the command exactly as it appears on the Configuration File.
Type “IncludeRSSI=True” and hit “Return”
Attention! All commands are case sensitive.
The new setting will be saved on the configuration file and automatically applied when you
leave the configuration mode command prompt.
6) To retrieve the current configuration data, just type “r” while in the main RAM mode
command prompt.